Sorbent MS (0.7 - 1.4)

Sorbent MS is a new filter media for manganese and iron removal from water.

Filter media is used in centralized systems of water treatment, in reclaimed service systems of water treatment and purification water for removal of manganese, iron, chrome, heavy non-ferrous metals (copper, zinc, lead, nickel, cadmium, etc). Filter medium separates suspended and colloidal substances. It is recommended for use as a pressure and a non-pressure systems as a primary or multilayer layer.

The sorbent regeneration no requires the use of any chemical reagents. For regeneration is necessary periodically to flush sorbent by water or water – air (which is more effective). In operation, the sorbent is not spent. It is a very durable material. Sorbent MS is not processed further chemically active coatings based on manganese or other catalytically active metal, which eliminates the probability of failure for exhaustion or flushing data surfaces.

It is especially effective when used together with Sorbent AS.

Benefits

•  long service life with low annual loss of less than 2%
• “Sorbent MS” functions  with all kinds of oxidants: ozone, sodium hypochlorite, potassium permanganate, and others.
• it functions  in the presence of hydrogen sulfide
• operates at pH = 6.0 (to load BIRM minimum 6.8)
• preliminary chlorination does not reduce the activity of “Sorbent MS”
• it increases the water pH to 2.5-3.0 units depending on the starting pH value of water, which enables the effective removal of marganese.
• it decreases in the filtration index Color 70-80% (auto coagulation on grain sorbent)
• permanganate oxidation reduction  is of 20-25%.

​

Important: before operation, it is necessary to soak it for 12-24 hours, followed by washing to remove transport dust.

We carry out wholesale deliveries of Sorbent MS in Europe. ofiss@geizer.com

Technical Data

• Bulk density, kg/m3:                                                                       1350-1400
• Specific surface, kg/m3:                                                                  2850
• Abrasion, %:                                                                                   0,01
• Grindability, %:                                                                                0,19
• Coefficient of grain form:                                                                  1,4 – 1,6
• Intergranular porosity, %:                                                                  46 – 49
• Filtration flow rate, m / hr:                                                                 10-15
  Backwash flow rate of 30-35%, m / hr: 28-30
  Height of the layer, sm. : 40-100
• Fractions mm. 0,315-0,7;  0.7-1.4; 0.7-2.0; 1.5-3.0; 2.0-5.0 under the order